Double auger vertical mixer with side discharge door Model MV Duplo-14 16 18 20 y 22
The duplo vertical mixer is based on a tapered conical shape with two conical vertical augers enables any product to be chopped or mixed. For larger capacities, the height of the single vertical mixers is excessive and is not suitable in many installations.
The use of twin-auger design allows a lower machine with a larger capacity to be used, with the same mixing advantages of single auger machines. Mixing is carried out by the effect of the multiple serrated blades of the augers, which cut the product while it moves up and then falls back down thanks to gravity.
The wide range of discharging possibilities of this type of mixer is one of its great advantages, as it can be adapted to any installation. In addition, this mixer model is equipped with a hydraulically controlled gear change using wires or an optional solenoid valve block.
Other advantages:
* Independent frame
* Greater capacity for lower heights
* Simple operation
* Low power consumption
* Quick mix
* Simple maintenance
FRONT DOOR | MV14 DUPLO | MV16 DUPLO | MV18 DUPLO | MV20 DUPLO | MV20 DUPLO |
CAPACITY m³ | 14 | 16 | 18 | 20 | 22 |
POWER HP | 70 | 75 | 80 | 90 | 95 |
PNEUMATICS | 445/45-19,5 | 445/45-19,5 | 445/45-19,5 | 445/45-19,5 | 445/45-19,5 |
A mm | 7332 | 7332 | 7680 | 7728 | 7779 |
B mm | 4859 | 4859 | 5099 | 5099 | 5099 |
C mm | 2250 | 2250 | 2300 | 2300 | 2300 |
D mm | 1942 | 1942 | 1942 | 1942 | 1942 |
E mm | 2550 | 2677 | 2679 | 2839 | 3009 |
F mm | 713 | 713 | 713 | 713 | 713 |
TARE Kg | 5635 | 5910 | 6185 | 6385 | 6500 |
BACK DOOR | MV14 DUPLO | MV16 DUPLO | MV18 DUPLO | MV20 DUPLO | MV20 DUPLO |
CAPACITY m³ | 14 | 16 | 18 | 20 | 22 |
POWER HP | 70 | 75 | 80 | 90 | 95 |
PNEUMATICS | 445/45-19,5 | 445/45-19,5 | 445/45-19,5 | 445/45-19,5 | 445/45-19,5 |
A mm | 7332 | 7459 | 7859 | 7859 | 7859 |
B mm | 4859 | 4859 | 5099 | 5099 | 5099 |
C mm | 2250 | 2250 | 2300 | 2300 | 2300 |
D mm | 1942 | 1942 | 1942 | 1942 | 1942 |
E mm | 2340 | 2677 | 2679 | 2839 | 3009 |
F mm | 713 | 713 | 713 | 713 | 713 |
TARE Kg | 5685 | 5960 | 6235 | 6435 | 6550 |
2 vertical auger with serrated blades.
Four load cells.
4 adjustable counter knives.
Vertical ladder accessible from both sides.
Gear change.
Programmable Scale (15 rations, 15 ingredients).
Cable control.
Hydraulic footstand and manual pump.
Hydraulic and manual brake.
Towbar height adjustable screw.
Boogie
Footstand:
* Hydraulic footstand with hand pump
* Mechanical Footstand
Brake:
* Manual brake
* Hydraulic brake
* Manual and hydraulic brake
* Pneumatic and manual brake
Discharges:
* Additional belt
* Additional discharge door
* Door on curved part
* Tailgate door opening
* Manual distributor for feeding sheep
* Belt on side door
* Conveyor belt extension
* Moveable belt
Others:
* Hopper for gravity concentrates
* Belt flow regulator
* Battery bracket
* Full battery kit
* Positioning light installation
* CV PTO
* Water incorporation ring
* Overflow ring
* Single ladder
* Liquid feed pipe
* Hydraulic counter knives
* Boggie
* Super magnetic plate
Triplo:
* Change gear
* Pass from boggie to tridem
Controls:
* Manual flexible wire control
* Electrical control
* Electrical control gear shift
* Wireless radio control
Hydraulic system accessories:
* Straw Chopper - Solenoid valve control
* Swivel chute - Solenoid valve control
* Side and swivel chutes - Solenoid valve control